Table of Contents
Advertisement
5.9.4 Standard Seat Hanger depth adjustment
•
Remove both sets of 5mm hanger depth adjustment
bolts, (Fig.5.45).
•
Slide both hanger receivers to the desired location,
(Fig.5.46, inset B).
•
Replace both sets of depth adjustment bolts,
(Fig.5.47).
•
Use 20 N/m or 177 in/lb of torque.
Fig. 5.45
Fig. 5.47
28
SALSA M
2
Mini
Fig. 5.46
Rev.1.0
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Salsa M2 Mini and is the answer not in the manual?
Questions and answers
n you please advise
Connecting VR2 with 2 actuators to Salsa Mini M2. Please advise how to replace.
To connect the VR2 control with 2 actuators to the Quickie Salsa M2 Mini:
1. Ensure the VR2 control system is programmed for actuator operation.
2. Use the actuator button on the VR2 control panel to operate the actuators.
3. Each actuator function (e.g., seat lift or tilt) must be assigned to the actuator button.
4. You can reverse actuator direction relative to joystick movement if needed.
5. If no actuators are programmed, the actuator button has no function.
Make sure the control system is correctly set for the desired actuator functions.
This answer is automatically generated