Source Menu; Pc Mode Menu System; Pc Position Menu - Telefunken T42A857FHD Instruction Manual

Country
Press " " or " " button to select your country.
If you want to exit from A.P.S. function, press
the BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following OSD
will be displayed:
Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.

Source Menu

Press " " or " " button and select the sixth icon.
Then press " " or OK button. Source menu
appears on the screen:
In source menu, highlight a source by pressing
" " or " " button and switch to that mode
by pressing " " button. Source options are;
TV , DTV/USB , EXT-1 , EXT-2 , FAV , HDMI-1 ,
HDMI-2 , HDMI-3 , HDMI-4 YPbPr or PC-VGA .
Note : Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 116 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 116

PC Mode Menu System

See "Connecting the LCD TV to a PC" section
for connecting a PC to the TV set.
For switching to PC source, press SOURCE
button on your remote control and select PC
input. You can also use "Source" menu to switch
to PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.

PC Position Menu

Select the first icon by pressing " " or
" " button. PC Position menu appears on the
screen:
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using " " or " "
buttons. Press OK or " ", " " button.
Warning : Please ensure auto adjustment is
performed with a full screen image to ensure
best results.
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using " " or "
" button. Use " " or " " button to adjust the
value.
V (Vertical) Position
This item shifts the image vertically towards the
top or bottom of the screen.
English - 116 -
05.10.2009 20:13:06 05.10.2009 20:13:06