Telefunken T42A857FHD Instruction Manual page 102

press OK to format the hard disk. Select "NO"
and press OK to cancel. Ensure you back up
important recordings before you format the
USB disk unit.
Hard Disk Info
To view the details about the USB disk, highlight
Hard Disk Info by using " " or " " key and press
OK. USB disk information will be displayed:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the RETURN button
on the remote control to exit.
AC3 Audio (* for EU countries only)
In the Confi guration Menu, highlight the AC3
Audio item by pressing " " or " " buttons. Use
the " " or " " buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (* for EU countries only)
Use " " or " " button to select Hard of Hearing
and then press " " or " " button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 100 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 100
Favourite Mode
Use this function to enable or disable favourite
mode. Press " " / " " button to set this function
as on or off.
Broadcast Type
When you set the desired broadcast type by
using " " or " " button, the TV will display the
related channel list. If the related source has
does not include any stored channels, "No
channels for this type have been found."
message will be displayed on the screen.
Channel List
Use " " or " " buttons to go to Channel List
option. Use " " or " " buttons to toggle Channel
List Mode. If you select "TV Only", with the "
" or " " buttons, you navigate through only TV
channels. If you select "Radio Only", with the "
" or " " buttons, you navigate through only
radio channels. If you select "Text Only", with
the " " or " " buttons, you navigate through
only text channels.
Active Antenna
Use " " or " " buttons to highlight Active
Antenna option.
When antenna power option is set as On
by pressing " " or " " button, +5V will be
transmitted to the antenna output.
This feature enables the use of active
antenna.
Note: Antenna power should be "Off" when standard
antenna is used instead of the active antenna.
Scan Encrypted
Scan Encrypted Channel feature will always be
ON after performing first time installation. When
this setting is on, search process will locate the
encrypted channels as well. If it is set as OFF
manually, encrypted channels will not be located
while in automatic search or manual search.
Use " " or " " button to select Scan Encrypted
and then press " " or " " button to set this
setting as On or Off.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
TV automatically powers up at 3.00 A.M. each
English - 100 -
05.10.2009 20:12:58 05.10.2009 20:12:58