Connecting To A Dvd Player - Telefunken T42A857FHD Instruction Manual

Dvb-c/t pvr

Table of Contents

Available languages

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer to your DVD player's instruction book for

additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD

player as illustrated below, switch to HDMI source. See, "Input Selection" section.

• Most DVD players are connected through COMPONENT SOCKETS. Use a component video

cable to connect video input. For enabling audio, use a component audio cable as illustrated

below. When the connection is made, switch to YPbPr source. See, "Input selection" section.

• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown

below.

Note : These three methods of connection perform the same function but in different levels of quality. It is not

necessary to connect by all three methods.

02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 83

REAR VIEW

English - 83 -

05.10.2009 20:12:52

Table of Contents

Table of Contents