Osd Operation; Channel Menu - Telefunken TF-LED43S90T2SU Instruction Manual

.
Operation

OSD operation

1.Press MENU button to enter the setting
menu displayed on the screen.
2.Press LEFT/RIGHT cursor buttons on the
RC to select setting page.
3.Press OK button on the RC to go to the
parameter list.
4.Press UP/DOWN cursor buttons on the
RC to select a parameter to adjust.
5.Press LEFT/RIGHT cursor buttons on the
RC to adjust the selected parameter.
6.Press MENU button to return to the
previous menu page. Press EXIT button on
the RC to quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures of
OSD menu are for reference only; they may
differ from the actual screens.
Picture setting
Picture Mode: Select the favorite picture
●
mode. Only when the picture mode is User can
you select to customize settings.
Backlight: Adjust the brightness of the
●
screen.
Noise Reduction: Dynamic noise
●
reduction effect for reducing the video noise
level.
Aspect Ratio: Set the aspect ratio of the
●
screen.
Color Temp: Change the overall color
●
cast of the picture.
More Settings
●
DLC: Enable or disable the Dynamic
Lightness Control feature.
9
Sound setting
Sound Mode: Select the favorite sound
●
mode. Only when the sound mode is User
can you select to customize Bass and
Treble settings.
Sound Out: Choose the sound output.
●
Internal TV Speaker/SPDIF/Headphone.
Balance: Select the proportion between
●
the left and right speakers.
AVC: Reduce the difference between
●
channel and program volume automatically.
More Settings
●
Digital Audio Output: Select the digital
audio output mode: OFF/RAW/PCM.
SPDIF Delay: Adjust the SPDIF delay.
Surround: Enable or disable surround
sound.
Audio Only: Only sound can be heard in
this state, and the image on the TV screen
disappears, press any key except the
volume keys to exit.