Telefunken T42A857FHD Instruction Manual page 108

Select your Country , Language and Text
language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Frequency Search
Enter the desired frequency, Modulation and
symbol rate numbers. Modulation can be set
as Auto, 16QAM, 32QAM, 64QAM, 128QAM
and 256QAM.
When fi nished, press OK button, and the TV will
start frequency search.
Network Search
When you select Network Search line and press
OK button, the following menu screen will be
displayed on the screen:
screen will be displayed. Enter Start and Stop
frequency ranges that you want to search
within.
• After this operation, you can set Search Step
as 8000 KHz or 1000 KHz. If you select 1000
KHz, the Tv will perform search process in
a detailed way.Searching duration will thus
increase accordingly. When fi nished press
OK button to continue. The process will then
start.
During the Network Search, if channels that
have network search info are found, the TV will
automatically show the frequencies of those
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 106 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 106
channels and network search process will end
by locating those channels.
After search is completed, a message asking
whether to search for analogue channels
appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
Select your Country , Language and Text
language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Clear Service List (*)
(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
Use this setting to clear channels stored. Press
" " or " " button to select Clear Service List and
then press OK. The following OSD message will
be displayed on the screen:
English - 106 -
05.10.2009 20:13:00 05.10.2009 20:13:00