Timeshifting; Instant Recording; Watching Recorded Programmes - Telefunken T42A857FHD Instruction Manual

If the selected channel is locked, you must
enter the correct four numeric code to view the
channel. "Enter PIN" will be displayed on the
screen in such a case:

Timeshifting

IMPORTANT: To record a programme, you should
fi rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature
will not be available.
• Press (PAUSE) button while watching a
broadcast for switching to timeshifting mode.
• In timeshifting mode, the programme is paused
and simultaneously recorded to the connected
USB disk (*). Press
to watch the paused programme from the
stopped moment.
• This playback is performed in x1 playback
speed. You will see the timeshift gap between
the real and the timeshifted programme in the
info bar.
• Use (PREVIOUS/NEXT) buttons
to move forward or backward on timeshift
playback. When the timeshift is reached,
timeshifting mode will be quitted and you will
switch back to watching normal broadcast.
• Press (STOP) button to quit timeshifting
mode.
(*) Similtaneous timeshifting recording's duration
depends on your connected USB disk's file size
and defined Max. Timeshift in the Recordings
Confi guration menu. See the section, "Recordings"
for more information on setting Max. Timeshift.
Note: Switching to a different broadcast or source;
and viewing main menu are not available during the
recording.

Instant Recording

IMPORTANT: To record a programme, you should
fi rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature
will not be available.
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 91 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 91
(PAUSE) button again
English - 91 -
• Press (RECORD) button to start recording
an event instantly while watching a programme.
The following OSD appears on the screen:
• Record OSD will then be displayed for a short
time and the current event will be recorded.
• You can press (RECORD) button on the
remote control again to record the next event
on the EPG. In this case, OSD will display the
programmed events for recording.
• Press (STOP) button to cancel instant
recording. The following OSD will be
displayed:
Select Yes by using " " or " " / OK buttons to
cancel instant recording.
Note: Switching to a different broadcast or source;
and viewing Media Browser are not available during
the recording.

Watching Recorded Programmes

In the main menu, highlight Recordings Library
item by using " " or " " button and press OK
button to enter. Recordings Library will then be
displayed.
IMPORTANT: To view recordings library, you should
fi rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature
will not be available.
05.10.2009 20:12:55 05.10.2009 20:12:55