Telefunken T42A857FHD Instruction Manual page 105

Current
• Audio : if audio language is supported change
the audio language by pressing " " or " "
buttons
• Subtitle : if subtitle is backed up, alter the
subtitle language with " " or " " buttons. The
chosen language will be seen in subtitles.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
Language Settings
In the configuration menu, highlight the
Language Settings item by pressing " " or "
" buttons. Press OK and Language Settings
submenu will be displayed on the screen:
Use " " or " " buttons to highlight the menu
item that will be adjusted and then press " " or
" " button to set.
Notes:
• System Language determines the on-screen
menu language.
• Audio Language is used for selecting the
soundtrack of a channels.
• Primary settings are the first priority when
multiple choices are available on a broadcast.
Secondary settings are the alternatives when
the first options are not available.
• Movie Subtitle options functions as described
above.
Installation
IMPORTANT!
If you perform fi rst time installation while a USB
disk is connected to the system, you should fi rst
switch off the TV after fi rst time installation has
fi nished. You can then switch on the TV. This
process is important for enabling the USB disk
access after fi rst time installation.
The Installation menu is mainly intended to
help you for creating a Channel Table in the
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 103 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 103
most effi cient way. Select Installation from the
Confi guration menu by pressing " " or " "
buttons.
This menu includes the following items:
• Aerial Installation
• Cable Installation
• Clear Service List (*)
• First Time Installation
(*) For Denmark, Sweden, Norway or Finland.
Aerial Installation
Select Aerial Installation line and use OK
button to view the menu contents:
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item
is highlighted.
The following message appears on the
screen:
Highlight Yes or No by using " " or " " buttons
and press OK button to confi rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
English - 103 -
05.10.2009 20:12:59 05.10.2009 20:12:59