Analogue Teletext; Widescreen; Idtv Menu System; Channel List - Telefunken T42A857FHD Instruction Manual

are also channels with just digital teletext
broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting
is the same as the aspect ratio of the picture
viewed previously.
• When you press the
digital teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
"TELETEXT" explanations.

Widescreen

Depending on the type of the broadcast being
transmitted, programmes can be viewed in a
number of formats. Press the SCREEN button
repeatedly to select between Auto, 16:9, 4:3,
Panoramic, 14:9, Cinema, Zoom or Subtitle.
When Auto is selected, the format being
displayed is determined by the picture being
broadcast.
PLEASE NOTE : Menu size changes depending on
the chosen image size.

IDTV Menu System

The IDTV menu can only be viewed when
watching digital terrestrial broadcasting. Use the
SOURCE button to select DTV mode.
Press the " M ENU" button. The menu below
appears on the screen:

Channel List

Using the " " or " " button on the remote
control, make sure that the fi rst item, Channel
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 94 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 94
List, is highlighted and press the OK button to
display the Channel List.
The following operations can be performed in
this menu:
• Navigating the entire list of channels
• Deleting channels
button again, the
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels
Channel List is the place where the channels
are managed.
Navigating the Entire Channel List
Press " " or " " button for selecting the previous
or next channel. You can press RED or GREEN
button to move page up or page down.
To watch a specifi c channel, highlight it using
" " or " " button and then press " OK " button,
while the "Select" item on Channel List menu is
highlighted by using " " or " " button.
Then the name and number of the selected
channel will be displayed in the top-left and
top-right of the channel display at the top-right
of the screen, respectively.
Moving the channels in the channel list
• Press " " or " " buttons to select the channel
that will be moved.
• Press " " or " " buttons to select the " Move "
item on Channel List menu.
Following OSD will be displayed next to " OK "
item to indicate that enter a number by using
the numeric buttons on the remote control and
press " OK " to confi rm.
English - 94 -
05.10.2009 20:12:56 05.10.2009 20:12:56