Telefunken T42A857FHD Instruction Manual page 106

Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
Select your Country , Language and Text
language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Channel Search
In manual channel scan, the number of the
multiplex is entered manually and only that
multiplex is searched for the channels. For each
valid channel number, signal level and signal
quality are shown on the screen.
In both manual and auto search any existing
channel in the database is not re-stored to avoid
redundant duplicates of that channel.
Frequency Search
Enter the desired frequency. When fi nished,
press OK button, and the TV will start frequency
search.
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 104 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 104
Network Search
When you select Network Search line and press
OK button, the following menu screen will be
displayed on the screen:
Select YES to continue and Network Search
screen will be displayed. The process will then
start.
During the Network Search, if channels that
have network search info are found, automatic
search process will end by locating those
channels.
After search is completed, a message asking
whether to search for analogue channels
appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
English - 104 -
05.10.2009 20:13:00 05.10.2009 20:13:00