Configuration Examples; Example For Configuring A Sip Ag - Huawei AR1200 Series Configuration Manual - Voice

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice

1.10 Configuration Examples

This section provides a SIPAG configuration example.

1.10.1 Example for Configuring a SIP AG

This section describes how to configure a SIP AG to transmit voice and data services.
Networking Requirements
As shown in
and signaling streams with the MGC on the IMS. Users connect to the IMS through the SIP AG
to use voice, data, and multimedia services.
Figure 1-2 SIP AG networking
port 2/0/0
POTS
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Issue 03 (2011-09-30)
Figure 1-2, the SIP AG is directly connected to user terminals and exchanges media
Eth1/0/0
SIPAG
port 2/0/2
port 2/0/1
POTS FAX
Configure the AR1200 to work in SIP AG mode.
Create SIP AG users and set parameters for the SIP AG interface.
Set parameters of SIP AG users.
Interface through which the SIP AG exchanges media and signaling streams with the MGC:
Ethernet1/0/0
IP address of Ethernet1/0/0: 1.1.1.1/24
IP address and port number of the primary proxy server: 2.2.2.2/5060
SIP AG's ports directly connected to user terminals: port 2/0/0, port 2/0/1, and port 2/0/2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IMS
Network
1 SIPAG Configuration
AR
56