Huawei AR1200 Series Configuration Manual - Voice page 64

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
# Reset the SIP AG.
[Huawei-voice] sipag 1
[Huawei-voice-sipag-1] reset
Are you sure to reset MG interface?(y/n)[n]: y
[Huawei-voice-sipag-1]
Reset MG interface succeeds!
Step 4 Verify the configuration.
Then user terminals on the SIP AG can implement voice communication.
Run the display voice sipag [ { running | config } mgid ] command to view detailed information
about the SIP AG.
<Huawei> display voice sipag config 1
MGID
Dynamic signalling IP address name
Signalling IP
Signalling port
Dynamic media IP address name
Media IP
Transfer mode
Primary proxy IP 1
Primary proxy IP 2
Secondary proxy IP 1
Secondary proxy IP 2
Primary proxy port
Secondary proxy port
Primary proxy domain name
Secondary proxy domain name
Proxy address mode
Home domain name
SIP profile index
Service logic index
Server Address DHCP option
Description
AG domain name
Phone context
Register URI
Conference factory URI
Subscribe to UA profile
Subscribe to reg state
Subscribe to MWI
SDP negotiation mode
Mode of supporting proxy dual-homing : Dual home
Proxy detection mode
Proxy refresh mode
Run the display voice sipaguser [ sipaguser-name ] command to view detailed information
about the SIP AG users.
<Huawei> display voice sipaguser 1
Slotid/Subcard/Portid
MGID
Base telno
Usergroup name
Extend telno
Usergroup name
Priority
Line type
CLIP transmission sequence : After
CLIP format
DC time
FSK time
VQE agc
VQE sns
VQE agc level
Issue 03 (2011-09-30)
: 2/0/0
: 1
: 11111111
:
:
:
: cat3
: DEL
: SDMF FSK
: 100 ms
: 800 ms
: Off
: Off
: -22 dbm0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 1
:
: 1.1.1.1
: 5060
:
: 1.1.1.1
: UDP
: 2.2.2.2
:
:
:
: 5060
:
:
:
: IP
: huawei.com
: 1: Default
: 0: Default
: 0: None
:
:
:
:
:
: Enable
: Disable
: Disable
: Remote
: Probe
:
ring
1 SIPAG Configuration
58