Huawei AR1200 Series Configuration Manual - Voice page 12

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Applicable Environment
Before configuring SIP AG service features, configure the AR1200 to work in SIP AG mode.
You can run the display voice service-mode command to view the working mode of the
AR1200. If the AR1200 works in SIP AG mode, skip this configuration.
Pre-configuration Tasks
Before configuring the AR1200 to work in SIP AG mode, complete the following task:
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
voice
The voice view is displayed.
Step 3 Run:
service-mode sipag
The AR1200 is configured to work in SIP AG mode.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
quit
Return to the user view.
Step 6 Run:
save
The configuration is saved.
Step 7 Run:
reboot
The AR1200 is restarted.
----End
Checking the Configuration
After the configuration is complete, the AR1200 works in SIP AG mode.
Run the display voice service-mode command to check the working mode of the AR1200.
Issue 03 (2011-09-30)
Configuring IP addresses and routing protocols for interfaces to ensure connectivity
NOTE
After the AR1200 is configured to work in SIP AG mode, restart the AR1200 to make the configuration
take effect.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
6