Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Parameter
Proxy
function
s
Registration of a SIP AG
with the specified proxy
server
RFC
2198
redunda
ncy
transmis
sion
Issue 03 (2011-09-30)
Command
Mode in
nte-negotiation-mode { negostart |
which RFC
fixedstart | no-initiative-start }
2833
transmission
is started
based on
negotiation
Mode used by
proxy-detect-mode { option | probe |
a SIP AG to
register }
detect a proxy
server
Mode in
proxy-dual-home { disable | dual-
which a SIP
home | auto-switchover }
AG is dual
homed to
proxy servers
Mode used by
proxy-refresh-mode { no-switch |
a SIP AG to
defer | immediate }
update the
proxy server
address
proxy-switchover { primary |
secondary }
Mode in
redundancy-negotiation-mode
which RFC
{ negostart | fixedstart | no-initiative-
2198
start }
redundancy
transmission
is started
Transmission
redundancy-nte { enable | disable }
of RFC 2833
audio data
using RFC
2198
redundancy
transmission
Mode in
redundancy-start-mode
which RFC
{ ordinary2198 | smart2198 }
2198
redundancy
transmission
is started
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
Remarks
By default, RFC 2833
redundancy
transmission is started
based on negotiation in
no-initiative-start
mode.
By default, a SIP AG
uses the probe mode to
detect a proxy server.
By default, a SIP AG
supports dual homing
but does not support
automatic switchover.
By default, a SIP AG
updates the proxy
server IP address after
a delay (defer mode).
To maintain or
troubleshoot the
current proxy server,
run this command.
By default, RFC 2198
redundancy
transmission is started
in no-initiative-start
mode.
By default, a SIP AG is
disabled from using
RFC 2198 redundancy
transmission to
transmit the RFC 2833
audio data.
By default, RFC 2198
redundancy
transmission is started
in ordinary mode.
13