Huawei AR1200 Series Configuration Manual - Voice page 49

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Context
DSP resources are limited and users have different requirements for DSP resources. To control
and allocate DSP resources properly, set the DSP resource control mode and the resource
threshold in hierarchical control mode.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
voice
The voice view is displayed.
Step 3 Run:
dsp
The DSP view is displayed.
Step 4 Run the following commands as required.
l
l
The resource threshold in hierarchical control mode can be set only when the DSP resource
control mode is priority.
----End
Configuring a DSP Template
This section describes how to configure a DSP template.
Context
To customize DSP parameters for data services, configure a DSP template. After a DSP template
is configured, specify the template for users according to the port and phone number. The DSP
template improves the call connection rate. After a template is specified successfully, parameters
in the DSP template take effect immediately.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 03 (2011-09-30)
Run:
resource-threshold mode { priority | normal }
The DSP resource control mode is configured.
Run:
resource-threshold { threshold1 threshold1 | threshold2 threshold2 |
threshold3 threshold3 }
The resource threshold in hierarchical control mode is set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
43