Configuring A Sipag User; Establishing The Configuration Task - Huawei AR1200 Series Configuration Manual - Voice

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
l
l
----End
Example
Run the display voice dsp command to check the DSP parameters.
<Huawei> display voice dsp
DSP code type
DSP RTP packet interval(ms)
T30 redundancy parameter value of T38 fax
T4 redundancy parameter value of T38 fax
Fax train mode
Fax max train rate
Fax V8 negotiate
DSP min adapted jitter buffer(ms)
DSP max adapted jitter buffer(ms)
DSP init adapted jitter buffer(ms)
DSP adapted jitter buffer threshold(ms)
DSP min fixed jitter buffer(ms)
DSP max fixed jitter buffer(ms)
DSP init fixed jitter buffer(ms)
DSP redundancy payload value
DSP NTE payload value
DSP clearmode payload value
DSP G.726-16k payload value
DSP G.726-24k payload value
DSP G.726-32k payload value
DSP G.726-40k payload value
DSP VBD payload value
VQM
RTCP package send interval time(ms)
RTCPXR
Severe degrade second threshold
DSP echo check
DSP packet lose compensate
DSP silence reduce
DSP auto VBD
Workmode
Normal

1.7 Configuring a SIPAG User

This section describes how to configure a SIPAG user.

1.7.1 Establishing the Configuration Task

Before configuring a SIP AG user, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the data required for the configuration. This
will help you complete the configuration task quickly and accurately.
Applicable Environment
On the IMS, a SIP AG is directly connected to a user terminal. You need to set parameters for
users on the SIP AG so that the users can use services on the IMS.
Issue 03 (2011-09-30)
Run the display voice dsp-dimm state command to check the status of a DSP or DSP
channel.
Run the display voice dsp-template command to check the DSP template configuration.
Threshold1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: G711A
: 10
: 3
: 3
: Local train
: V17
: Disable
: 2
: 135
: 2
: 150
: 2
: 135
: 60
: 96
: 97
: 100
: 103
: 104
: 101
: 105
: 102
: Disable
: 5000
: Enable
: 400
: On
: Off
: Off
: Host control
Threshold2 Threshold3
1 SIPAG Configuration
46