Setting Parameters For A Sip Ag User - Huawei AR1200 Series Configuration Manual - Voice

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Pre-configuration Tasks
Before configuring a SIP AG user, complete the following tasks:
l
l
Data Preparation
To configure a SIP AG user, you need the following data.
No.
1
2

1.7.2 Setting Parameters for a SIP AG User

This section describes how to set parameters for a SIP AG user.
Applicable Environment
On the IMS, a SIP AG is directly connected to a user terminal. You need to set parameters for
users on the SIP AG so that the users can use services on the IMS.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
voice
The voice view is displayed.
Step 3 Run:
sipaguser sipaguser-name
A SIP AG user is created and the SIP AG user view is displayed.
After a SIP AG user is created, set parameters for the SIP AG user, including the interface
number, SIP AG ID, and phone number.
Step 4 Run:
port interface-number
An interface number is configured for the SIP AG user.
Step 5 Run:
mgid mgid
Issue 03 (2011-09-30)
Setting the operation mode to SIP AG
Configuring a SIP AG interface
Data
SIP AG user interface number, SIP AG ID for the SIP AG user, and phone number
of the SIP AG user
(Optional) SIP AG ID for the SIP AG user, SIP AG user in the SIP service data profile,
and phone number of the SIP AG user in the SIP service data profile
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
47