Checking The Configuration - Huawei AR1200 Series Configuration Manual - Voice

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Function/Service
UUS3 service
----End

1.7.5 Checking the Configuration

Procedure
l
l
l
----End
Checking the Configuration
After the configuration of a SIP AG user is complete, you can view the configuration of the SIP
AG user.
Run the display voice sipaguser [ sipaguser-name ] command to check the configuration of the
SIP AG user.
<Huawei> display voice sipaguser 1
Slotid/Subcard/Portid
MGID
Base telno
Usergroup name
Extend telno
Usergroup name
Priority
Line type
CLIP transmission sequence : After
CLIP format
DC time
FSK time
VQE agc
VQE sns
VQE agc level
VQE sns level
DSP input gain
DSP output gain
DSP template
Ans bar by single tone
Bell ans flag
FSK mode
Fsk tas pattern
Run the display voice sipag usergroup name command to check information about user group
huawei.
<Huawei> display voice sipag usergroup huawei
Running state
Issue 03 (2011-09-30)
Run the display voice sipaguser [ sipaguser-name ] command to check the configuration
of the SIP AG user.
Run the display voice sipag usergroup name command to check information about user
group huawei.
Run the display voice servicedata [ name | sipaguser sipaguser-name telno-value ]
command to check service data in the SIP service data profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
uus3 { enable | disable }
: 2/0/0
: 1
: 11111111
:
:
:
: cat3
: DEL
ring
: SDMF FSK
: 100 ms
: 800 ms
: Off
: Off
: -22 dbm0
: 12 dB
: 0 dB
: 0 dB
:
: Off
: Off
: BELL202
: NO TAS
:
1 SIPAG Configuration
Default Setting
disable
53