Setting Dsp Parameters - Huawei AR1200 Series Configuration Manual - Voice

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Step 4 Run the following commands as required.
l
l
l
l
l
----End
Checking the Configuration
After the configuration is complete, you can view the configured SIP stack parameters.
Procedure
l
----End
Example
Run the display voice sip command to check the configured SIP stack parameters.
<Huawei> display voice sip
SIP stack parameter & timers:

1.6.3 Setting DSP Parameters

This section describes how to set DSP parameters.
Issue 03 (2011-09-30)
Run:
header-folding enable
Header folding in the authentication header field is enabled.
Run:
field-header max-forwards max-forwards-value
The value of the Max-forwards header field is set.
Run:
field-header organization organization-head
The value of the Organization header field is set.
Run:
field-header server server-head
The value of the Server header field is set.
Run:
field-header user-agent user-agent-head
The value of the User-agent header field is set.
Run the display voice sip command to check the user-defined ring.
Server Header Field
Organization Header Field
User-agent Header Field
Max-forwards Header Field
Headline-Folding-Flag
Entity Based Session Timer Flag
T1 Timer(Unit:ms)
T2 Timer(Unit:ms)
T4 Timer(Unit:ms)
TD Timer(Unit:ms)
Min-SE Timer(Unit:s)
Session Progress Timer(Unit:s)
Session Reliable Progress Timer(Unit:s): 60
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
:
:
:
: 70
: Disable
: Disable
: 500
: 4000
: 5000
: 32000
: 90
: 180
34