Huawei AR1200 Series Configuration Manual - Voice page 15

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Step 4 Run:
sipag mgid
A SIP AG is created and the SIP AG view is displayed.
Step 5 Set mandatory parameters on the SIP AG interface.
Parameter
Media IP address
Signaling IP address
Signaling port number
Mode in which the IP
address of a proxy server
is obtained
Paramet
ers for
the
primary
proxy
server
Issue 03 (2011-09-30)
Command
media-ip { media-ip | media-addr-
name media-addr-name }
signalling-ip { signal-ip | signalling-
addr-name signal-addr-name }
signalling-port signalling-port-value
proxy-address-mode { static | dns-a |
dns-srv | dns-naptr }
IP address primary-proxy-ip primary-proxy-ip-
value1 [ primary-proxy-ip-value2 ]
Domain name primary-proxy-domain primary-
proxy-domain-name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
Remarks
The media IP address
of the SIP AG interface
must be obtained from
the media IP address
pool.
The signaling IP
address of the SIP AG
interface must be
obtained from the
signaling IP address
pool.
By default, no
signaling port number
is configured for a SIP
AG interface.
Mode in which the IP
address of a proxy
server is obtained:
l When the static
mode is used,
configure an IP
address and a port
number for the
primary proxy
server.
l When the DNS-A,
DNS-SRV, or
DNS-NAPTR
mode is used,
configure a domain
name for the
primary proxy
server.
By default, no IP
address is configured
for the primary proxy
server.
By default, no domain
name is configured for
the primary proxy
server.
9