Huawei AR1200 Series Configuration Manual - Voice page 63

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
l
Procedure
Step 1 Configure the AR1200 to work in SIP AG mode.
<Huawei> system-view
[Huawei] voice
[Huawei-voice] service-mode sipag
Changing of the protocol configuration takes effect after you save the data and
then reboot the system. Are you sure to change the protocol configuration? (y/n
)[n] : y
[Huawei-voice] quit
[Huawei] quit
<Huawei> save
The current configuration will be written to the device.
Are you sure to continue? [Y/N]y
<Huawei> reboot
Info: The system is now comparing the configuration, please wait.
System will reboot! Continue ? [y/n]:y
Info: system is rebooting ,please wait...
Step 2 Configure a SIP AG interface.
# Configure an IP address pool.
<Huawei> system-view
[Huawei] interface ethernet 1/0/0
[Huawei-Ethernet1/0/0] ip address 1.1.1.1 24
[Huawei-Ethernet1/0/0] quit
# Set the IP address pool for exchanging media and signaling streams.
[Huawei] voice
[Huawei-voice] voip-address signalling interface ethernet 1/0/0 1.1.1.1
[Huawei-voice] voip-address media interface ethernet 1/0/0 1.1.1.1
# Set parameters on the SIP AG interface.
[Huawei-voice] sipag 1
[Huawei-voice-sipag-1] signalling-ip 1.1.1.1
[Huawei-voice-sipag-1] media-ip 1.1.1.1
[Huawei-voice-sipag-1] signalling-port 5060
[Huawei-voice-sipag-1] transfer udp
[Huawei-voice-sipag-1] primary-proxy-ip 2.2.2.2
[Huawei-voice-sipag-1] primary-proxy-port 5060
[Huawei-voice-sipag-1] home-domain huawei.com
[Huawei-voice-sipag-1] profile 1
[Huawei-voice-sipag-1] quit
Step 3 Configure SIP AG users.
# Configure SIP AG users.
[Huawei-voice] sipaguser 1
[Huawei-voice-sipaguser-1] port 2/0/0
[Huawei-voice-sipaguser-1] mgid 1
[Huawei-voice-sipaguser-1] base-telno 11111111
[Huawei-voice-sipaguser-1] quit
[Huawei-voice] sipaguser 2
[Huawei-voice-sipaguser-2] port 2/0/1
[Huawei-voice-sipaguser-2] mgid 1
[Huawei-voice-sipaguser-2] base-telno 11112222
[Huawei-voice-sipaguser-2] quit
[Huawei-voice] sipaguser 3
[Huawei-voice-sipaguser-3] port 2/0/2
[Huawei-voice-sipaguser-3] mgid 1
[Huawei-voice-sipaguser-3] base-telno 11113333
[Huawei-voice-sipaguser-3] quit
Issue 03 (2011-09-30)
Phone numbers of user terminals: 11111111, 11112222, and 11113333
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
57