Huawei AR1200 Series Configuration Manual - Voice page 20

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice
Parameter
Registrar URI
Ringing parameters
SCTP stack parameters
SDP negotiation mode
Index of the service logic
used by a SIP AG
Issue 03 (2011-09-30)
Command
VBD redundancy-vbd { enable | disable }
transmission
using RFC
2198
redundancy
transmission
Voice redundancy-voice { enable |
transmission disable }
using RFC
2198
redundancy
transmission
register-uri uri
ringmode index ringmode-name
[ cadence-ring cadencering-value |
initial-ring initialring-value ]
sctp { assoc-maximum-
retransmission assoc-max-retrans |
checksum-arithmetic checksum-arith
| heartbeat-interval hb-interval |
high-congestion-level high-
congestion-level-value | in-stream-
number in-stream-num | low-
congestion-level low-congestion-
level-value | maximum-init-
retransmission max-init-retrans | no-
congestion-level no-congestion-level-
value | out-stream-number out-
stream-num | path-maximum-
retransmission path-max-retrans |
rto-alpha rto-alpha-value | rto-beta
rto-beta-value | rto-init rto-init-value |
rto-maximum rto-max | valid-cookie-
life valid-cookie-life-value | }
sdp-negotiation-mode { local |
remote }
service-logic service-logic-index
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SIPAG Configuration
Remarks
By default, a SIP AG is
enabled to transmit
VBD using RFC 2198
redundancy
transmission.
By default, a SIP AG
does not use RFC 2198
redundancy
transmission to
transmit voice.
By default, no registrar
URI is configured for a
SIP AG.
By default, ringing
parameters of a SIP AG
is empty.
After SCTP stack
parameters are set,
reset the SIP AG to
make SCTP stack
parameters take effect.
By default, the remote
priority mode is used
for SDP negotiation.
By default, the service
logic index of a SIP AG
is 0.
14