Change System Time; Call Charge Mode - PABX 208AC Instruction Manual

Chapter Three

3.59 Change System Time

Format 1: * 95 1 YY MM DD W #
Format 2: * 95 2 HH NN #
YY = Year
DD = Date
HH = Hour
Description: This system is supports PC call management software can manager CO line
and extension calls, when use PC bill software, in order call bill memory of
system can store call bills normally when computer is closed, please adjust
system time properly.
Example: Assign system time is at 15:20pm on Aug 13, 2006 (Sunday).
Operating: 1) Lifts extension 8001 and unlock;
2) Input * 95 1 06 08 13 7 # ==> * 95 2 15 20 #
1. Denotes date and time by two digits, such as June denotes as 06;
2. Use 24 hours to denote time, i.g, at 4 o`clock afternoon is denoted as16;
3. Monday to Saturday is denoted as 1 ~ 6, Sunday is denoted as 7;
4. When power failure over 24 hours, system time may becomes inaccurate,
we are suggest to re-set system time when power is restore.

3.60 Call Charge Mode

Format 1: * 85 0 MN #
Format 2: * 85 1 #
MN = Delay duration = 10 seconds to 60 seconds
Description: Delay Detection Charge Mode: System will start charge when the assigned
time is expires even called party is not answer.
Polarity Reverse Detection Charge Mode: System will start charge only when
called party is answer.
Normally, user needs to apply Polarity Reverse Detection signal from telecom
office first, details please inquire your local telecom office.
System Program
( Change Year,Date, Week )
( Change Hour, Minute )
MM = Month
W = Week = Monday ~ Sunday = 1 ~ 7
NN = Minute
( Delay Detection Charge Mode )
( Polarity Reverse Detection Charge Mode )
36