Intercom Calling; Outside ( Co ) Line Access Mode Selection - PABX 208AC Instruction Manual

Chapter Two

2.1 Intercom Calling

Description: Allows an extension user to make a call to another extension.
Format 1: ABCD ( When extension is at non-direct access CO line mode)
Format 2: * ABCD ( When extension is at direct access CO line mode)
ABCD = Extension number
Example 1: Non-direct outgoing mode extension 8008 calls extension 8065.
Operating: 1) Lifts extension 8008, hear internal dial tone;
2) Input 8065;
3) Ringback tone (1s:4s) is sent indicates call made successfully.
Example 2: Direct outgoing mode extension 8011 calls extension 8083.
Operating: 1) Lifts extension 8011, hear external dial tone;
2) Input * first, then input 8083 after hear internal dial tone;
3) Ringback tone (1s:4s) is sent indicates call made successfully.
1. Intercom calling is not via telecom provider, it is free charge.
2. Internal dial tone sounds more reedy than external dial tone.

2.2 Outside ( CO ) Line Access Mode Selection

Description: Allows an extension user to make a call to an external party by use one of
the following line access methods.
2.2.1 Access Outside ( CO)Line by Press 0 or 9
Example: Non-direct outgoing mode extension 8008 make an outside call.
Operating: 1) Lifts extension 8008, hear internal dial tone;
2) Press 0 to get external dial tone;
3) Dial outside call number .
Refer page32 to learn related setting.
2.2.2 Access Outside ( CO) Line by Second or Third Outward Code
Example: Non-direct outgoing mode extension 8008 make an outside call via VOIP line
that is correspond to outward code 3.
Operating: 1) Lifts extension 8008, hear internal dial tone;
2) Press 3 to access VOIP line;
3) Dial outside call number.
This function is applies to place where has several telecom providers, allows
user access designated CO line that can supply least call fee, please refer 3.20
Operating
( Least Cost Route )
4