Assign Outside Line Ring By Turns; Enable Or Disable Outside Call Reaches To Extension; By One-Touch Dialing ( At Disa Mode) - PABX 208AC Instruction Manual

Chapter Three
3.21 Cancel Outward Code
Format : * 97 1 # ( Cancel second outward code )
* 97 2 # ( Cancel third outward code )
3.22 Clear Outside Line Ring by Turns
Format : * 11 MN #
Allows assign maximum of 8 extensions ( same or different ) are ring by
turns for each CO line when has call is received, when you are ready to do
setting ( 3.23), please use this program to clear previous setting first

3.23 Assign Outside Line Ring by Turns

Format : * 13 MN ABCD #
MN = CO line = 01 ~ 16
ABCD = Extension number
Description: Allows assign extension ring by turns when has outside call is access at
operator service mode, this function can supply a equal answering chance
for each extension user.
Example: Assign extension 8002, 8003, 8004 and 8005 will ring by turns when has
outside call is access on CO line 03.
Operating: 1) Lifts extension 8001 and unlock;
2) Input * 11 03 # first to clear previous setting of CO line 03;
3) Input * 13 03 8002 # ==> input * 13 03 8003 #;
input * 13 03 8004 # ==> input * 13 03 8005 #;
1. Allows assign maximum of 8 extensions ( same or different ) are ring by
turns for each CO line when has call is access;
2. When the assigned extension is busy, system will search idle extension
start from next extension automatically, in the case of all extensions are
busy, outside caller has to wait.
3.24 Enable or Disable Outside Call Reaches to Extension by
One-Touch Dialing ( at DISA mode)
Format : * 29 M #
M = 0 = Disable one touch dialing
M = 1 = Enable one touch dialing
Description: The outside caller will hear outgoing message when system is at auto-
attendant mode ( DISA).
Example, a greet message is play: "This is A company, for the sales Dept.
press 1; for the service Dept. press2; or input extension number directly ".
Outside caller can dial 1 to reach sales Dept. And extensions in sales Dept.
will ring by turn at this time.
Required to assign extension numbers for numeric button 1~9 first,
( related setting please refer 3.25 and 3.26)
System Program
23