Outside ( Co ) Line Ringing Selection; Attendant Extension Assignment - PABX 208AC Instruction Manual

Chapter Three
3.14 Outside ( CO ) Line Ringing Selection ( at Operator mode)
Description: When an outside call is received at certain CO line, the user can select
which extension will ring.
Format : * 12 MN ABCD #
M N = CO line port number = 01 ~ 16
ABCD =Ringing extension number
Example: At operator service mode, assign extension 8003 and 8013 will ring when has
outside call is on CO line 02.
Operating: 1) Lifts extension 8001, unlock system;
2) Input * 12 02 8003 # ==> * 12 02 8013 # ;
1. Allows assign maximum of 8 extensions are ringing at the same time for
each CO line, when you are ready to assign ringing extension, please clear
previous setting first by program of 3.13.
2. Any extension can be assigned as ringing extension.
3.15 Attendant 1 Assignment ( at Auto-attendant mode)
Format : * 25 ABCD #
ABCD = No.1 attendant extension number
Example: Assign 8006 as No.1 attendant extension at auto-attendant service mode.
Operating: 1) Lifts extension 8001, unlock system;
2) Input *25 8006 # ;
3.16 Attendant 2 Assignment ( at Auto-attendant mode)
Format : * 26 ABCD #
ABCD = No.2 attendant extension number
Example: Assign 8026 as No.2 attendant extension. at auto-attendant service mode.
Operating: 1) Lifts extension 8001, unlock system;
2) Input *26 8026 #
1. Allows any extension is assigned as attendant extension.
2. At auto-attendant mode, when outside caller dial 0, the line will reach to
attendant 1, when 1 is busy, the call will be auto-forwarded to attendant 2,
when both are busy, system will send suggestive message to outside caller;
3. At any service mode, when extension dial 9, the call will reach to attendant 1
first, if it is busy, the call will auto-forwarded to attendant 2, if both are busy,
system will send busy tone.
4. At default mode, Ext 8002 and 8003 are performed as attendant 1 and 2.
5. If you need more attendant extensions, allows assign Busy Transferred for
more extensions, when the called extension is busy, the call will be auto-
transferred to next assigned extension, allows extend to ten extensions.
System Program
20