Enable / Disable Extension User Use Speed Dialing Function; Fax Received Automatically - PABX 208AC Instruction Manual

Chapter Three

3.53 Enable / Disable Extension User Use Speed Dialing Function

Format 1: * 4 0 ABCD N #
ABCD = Extension number
N = 0 = Disable use speed dialing
N = 1 = Enable use speed dialing
Description: Assigns if extension has authority to use speed dialing function.
The authorized extension can make outside call by input ## MN, here MN
is speed dialing number that is accord to a CO line number, therefore, user
can store often use outside number in system. ( allows assign up to Ninety-
nine speed dialing numbers for outside numbers with max.of 24 digits per
number), refer (2.2.5 and 2.3)

3.54 Fax Received Automatically

3.54.1 Assign Fax Extension
Format: * 27 ABCD #
ABCD = Fax extension number
Description: When system is at auto-attendant mode, it can detect fax signal automatically
when has fax is access on CO line, and fax will be transferred to fax machine
as soon as fax signal is detected.
Needs to assign fax extension number to system by this program before use
auto-receive fax function.
Example: If extension 8009 is fax machine, please program as below:
Operating: 1) Lifts extension 8001, unlock system;
2) Input * 27 8009 # ;
1. When fax machine has been assigned at auto-receive mode, outside caller
can dial fax extension number first or only press START button on his fax
machine no need input any other numbers.
When fax machine is assigned at manual-receive mode, outside caller must
to dial fax extension number first.
2. This function is only effective on at auto-attendant mode.
3.54.2 Cancel Fax Received Automatically
Format: * 27 #
Description: When fax extension is cancelled, system will cancel fax received
automatically function.
System Program
34