Day Service Changing Mode - PABX 208AC Instruction Manual

Chapter Three

3.10 Day Service Changing Mode

Format : * 89 1 A M # ( Day 1 )
* 89 2 A M # ( Day 2 )
A = Day = Monday to Sunday = 1 to 7
M = 1 = Auto-attendant service
M = 0 = Operator service
Example: Assign system is at auto-attendant service mode on Sat. and Sun, other days at
operator service mode.
Operating: 1) Lifts extension 8001, unlock system;
2) Input *89 1 6 1 # ==> * 89 2 7 1 #;
1. This program will assign attendant mode for whole day, as long as if this
program is assigned for certain day, the Time Service Changing Mode
assignment will be disabled in that day. Allows combine function of 3.8
and 3.10 in practice, example:
Saturday and Sunday: Assign auto-attendant service mode;
Monday to Friday: Assign operator service mode in 8:00am to 12:00am,
and 13:30pm to 17:30 pm, other times at auto-attendant service mode.
2. Here attendant extension is as same as pre-assigned.
3.11 Cancel Day Service Changing Mode
Format : * 89 1 # ( Cancel Day 1)
* 89 2 # ( Cancel Day 2)
System attendant mode will be restored to previous mode by this program.
3.12 Cancel All Service Changing Mode
Format : * 89 3 #
This program will cancel programming of 3.8 and 3.10, system attendant
mode will be restored to previous mode.
3.13 Outside (CO)Line Ringing Extension Cleared ( at Operator mode)
Format : * 11 MN #
M N = CO line port number = 01 ~ 16
Example: Clear ringing extension when has outside calls on CO line 3 and 15.
Operating: 1) Lifts extension 8001, unlock system, input * 11 03 # ==> * 11 15 # ;
1. Input number by two digits 01~16, example, CO line 3 is denoted as 03.
2. Allows assign maximum of 8 extensions are ringing at the same time when
has outside call on per CO line. To avoid confusion, please use this program
to clear current ringing extension first before change ringing extension.
3. After cleared, if do not assign ringing extension by below program 3.14,
then, the default operator extension will ring.
System Program
19