Table of Contents
Advertisement
Chapter 2: Programming and Operating
2.1 Unlock System Password
Format:
* * 01 ABCD #
ABCD = System password ( Default is 1234 )
Description:
Password is required for entering the system programming mode.
Example:
Unlock system by password before system program:
Operating:
Lifts extension 801
is successful, you can start operating]
1.
System programming can only be performed by extension 801.
2. Required Telephone Set: DTMF dial mode.
3. Start with * key, and end with # key, no need to hangup 801 while
programming, otherwise you need to unlock system again by password
to start next programming.
Allows use * key to re-program if any error occur during programming,
need not hangup.
4. System will inform user setting is whether successful or failured.
5.
Herein after, all programming is after unlock system by password.
2.2 Change System Password
Format :
* 02 ABCD #
ABCD = System new password.
Example:
Change password to 5678.
Operating:
Lifts extension 801
Suggest administrator change system password before using, please
contact with service center of supplier in case forget password.
2.3 Internal Call
Allows an extension user to make a call to another extension.
Format 1:
ABC
Format 2:
* ABC
ABC = Extension number
Example 1:
Extension 808 is at non-direct access mode, he calls extension 806.
Operating:
Lifts 808 (hear internal dialing tone)
Extension 807 is at direct access mode, he calls extension 808.
Example 2:
Lifts 807 (hear external dialing tone)
Operating:
1. Ringback tone (1s:4s) is sent indicates call made successfully.
2. Internal call is free charge.
3. Internal dialing tone is more reedy than external dialing tone.
Input ** 01 1234 #
Input 1234
( When extension is at non-direct access CO line mode)
( When extension is at direct access CO line mode)
- 3 -
Hear [System unlocked
Start programming.
Input * 02 5678 #;
Input 806
Input * 808.
Advertisement
Table of Contents
