Assign Outward Code (Least Cost Route) - PABX 208AC Instruction Manual

Chapter Three
3.19 Verify External Inputted Holding Music
Format : * 24 #
Description: Allows user to input fond music to system as holding music, he can verify
the holding music performance by this program.
1.Verifying just for reference, the real timber should be verified in practise;
3.20 Assign Outward Code (Least Cost Route )
Format : * 97 1 A MN # ( Assign second outward code )
* 97 2 A MN # ( Assign third outward code )
A = Outward code = 1 ~8
MN = CO line jack number = 01~16
Description: Allows extension user make outside calls by input outward code to enter
special CO line ( least cost route), this function is suits for place where use
CO lines supplied by different telecom providers.
Example, dial 3 to enter telecom provider A lines, dial 4 to enter provider B
lines, here 3 is regarded as second outward code, and 4 is regarded as third
outward code.
Example: User has total 12 CO lines, 7 ordinary lines are connected with CO line jack
from 1 to 7, and 5 VOIP lines are connected with CO line jack from 8 to 12,
here assign when dial 3 will auto-search idle VOIP lines which start from CO
line jack 8.
Operating: 1) Lifts extension 8001, unlock system;
2) Input * 971 3 08 #;
1. The head digits of extension number should not same as outward code,
otherwise, that extension number will be invalid;
2. The special CO lines ( least cost lines) must be follow connected with
ordinary CO lines, when extension user dial 0 or 9 to make a outgoing call,
system will priority access idle ordinary CO line first, if all of ordinary
CO lines are busy, system will auto-search idle special CO line.
When user use outward code to access CO line ( refer 2.2.2 ), system will
priority auto-search idle special CO line start from special CO line port;
3. When user access special CO line by outward code, he can use special CO
lines only within himself group.
4. The direct-outgoing mode extension user is required to dial * first, then
dial outward code.
5. User can select CO line by format # MN ( refer 2.2.4 we regard it as the
first outward code), however, when the selected CO line is busy, user has
to select CO line again. In order to more convenient for user, allows assign
second and third outward code, when dial outward code, system will search
idle CO line start from assigned CO line automatically.
System Program
22