Time ( Day / Night ) Service Changing Mode - PABX 208AC Instruction Manual

Chapter Three
3.7.4 Auto-Attendant Answer Call that Received via Designated CO Line
Format : * 20 MN #
Example: Assign CO line 2 is at auto-attendant mode and others at operator answer mode.
Operating: 1) Lifts extension 8001 and unlock;
2) Input * 21 # ==> * 20 02 #;
When need to assign some CO lines are at auto-attedant answer mode, please
assign all CO lines at operator answer mode first, then assign certain CO
line at auto-attendant answer mode.

3.8 Time ( Day / Night ) Service Changing Mode

Format : * 87 AB CD EF GH M # ( Period 1)
* 88 AB CD EF GH M # ( Period 2)
AB CD = Time service start time
EF GH = Time service end time
M = 1 = Auto-attendant service
M = 0 = Operator service
Example: Assign system is at operator service mode in 8:30am ~ 12:00am, and 13:30
pm ~ 17:30pm, other times at auto-attendant service mode.
Operating: 1) Lifts extension 8001, unlock system;
2) Input *87 08 30 12 00 0 # ==> * 88 13 30 17 30 0 #;
1. Use 24 hours to denote the time;
2. Allows assign different service time in a day or extend to next day.
Example: Assign system is at auto-attedant service mode in
22:00pm ~ 8:00am, other times at operator service.
Input format: * 87 22 00 08 00 1 #
3. Here attendant extension is as same as pre-assigned (refer3.7)
4. Please ensure system time is correct in order time service changing is
works normal ( refer 3.59).
3.9 Cancel Time ( Day / Night ) Service Changing Mode
Format : * 87 # ( Cancel Period 1)
* 88 # ( Cancel Period 2)
After cancel this assignment, system attendant mode will be restored to
previous mode.
System Program
18