System Data Default Set; Outside ( Co ) Line Connection Assignment; Disable Co Lines - PABX 208AC Instruction Manual

Chapter Three

3.4 System Data Default Set

Format : * 6 000 #
Description: This system can initialize system-programmed data.
All data can be restored to default setting except data of the follow 3 parameters.
1. Outside line connection assignment ( CO parameters);
2. Extension number parameters;
3. Call bill memory.
Default Values
Function
No
1
Attendant Mode
2 Outside (CO) Line Ringing Extension
Operator Extension at DISA mode
3
4 Outside( CO ) Line Access Mode
5
Outside (CO ) Line Caller ID signal
6
Trunk group
Extension, CO Line Group
7
Extension outside call class
8
Head-digits assignment
9
10 Monitor voice record
Call duration time limit
11
Hookswitch flash time
12

3.5 Outside ( CO ) Line Connection Assignment

Description: Assigns which CO line(s) is connected to the system or not.
3.5.1 Assign CO Line Connection
Format : * 31 ABCDEF #
ABCDEF = CO line jack need to be connected
Example: Connect CO lines with jack 1,2,3,4 , namely, it is enable CO1,2,3,4.
Operating: 1) Lifts extension 8001 unlock system;
2) Input * 31 1234 #;

3.6 Disable CO Lines

Format : * 31 #
System Program
16
Default value
Operator attendant
8001, 8002, 8003,8004;
8002,8003
Dial 0 or select CO line
Adapt with FSK, DTMF
Not set
0
Not set
Not set
Not set
Not set
760ms