Call On Holding; Remote Program - PABX 208AC Instruction Manual

Chapter Two

2.27 Call on Holding

Format: Tap hookswitch + # # #
Description: Allows extension user can put an external call is on holding.
Example: When an extension is talking with outside caller, he can tap hook-switch and
# # #
input to put call is on holding, he can make other call or do other operating
at this time.
# # #
He can input
Allows other extension retake this call by input

2.28 Remote Program

Format : Tap hookswitch + # * # *
Description: Allows an extension user to program a PABX system that is using in
different place, it can supply a convenient and high-efficiency service for
PABX end user.
Example: When you encountered puzzle on system programming, you can solve it with
the help of PABX dealer or manufacturer ( herein after named service center )
by their remote program operating.
Operating: 1) Lift your extension 8001, make a call to service center;
2) When your call is get through to service center, please tap hook-switch, here
service center technician is under holding music, you hear internal dial tone;
3) You should input # * # * on your phone can restore talk with technician;
4) You can ask technician to assign functions according your necessary by phone,
he can program your PABX by his telephone at the same time.
5) Please hangup your extension after complete setting.
1. You must to call service center by your extension 8001;
2. When your call is get through to service center, technician can start program
for your machine need not input system password;
3. Also allows technician call you if necessary (at any attendant mode), when
his call is received at your side, please transfer this call to extension 8001,
remote program can be performed when communicate is established.
Operating
to retake call within 4minutes, otherwise, line will be released.
14
# # *.