Outside ( Co ) Line Connection Assignment; Access Outside ( Co ) Line Instruction; Access Co Line By Dial 0 Or Tap Hookswitch; Access Co Line Directly - PABX TC-208 SP Instruction Manual

Telephone switch
Table of Contents

Advertisement

Chapter 2: Programming and Operating

2.4 Outside ( CO ) Line Connection Assignment

Format 1:
* 3 AB #
Format 2:
* 3 # ( Use for intercom only )
AB = CO line ( 1 or 2 )
Description;
Assigns which CO line(s) is connected to the system or not.
Example:
Connect CO line 1 and CO line 2.
Input format
When extension user make external call it will enter CO line according
to priority. e.g the first call will enter line1 priority, meanwhile, the
second call will enter line 2 in case it is free. We had better connect CO
lines used for receive incoming call frequently with after jacks because
anterior lines are occupied by outgoing calls often.

2.5 Access Outside ( CO ) Line Instruction

Allows make external call by any one of following methods 2.5.1~2.5.3.

2.5.1 Access CO Line by Dial 0 or Tap Hookswitch

Extension 808 is at non-direct access mode, he makes external call.
Example:
Lifts extension 808
Operating:
Related setting please refer

2.5.2 Access CO Line Directly

Extension 808 is at direct access mode, he makes external call.
Example:
Operating:
Lifts extension 808
Related setting please refer 2.5.4.

2.5.3 Access Preferred CO Line

Format 1:
# M
Format 2:
* # M (
M= CO line ( 1 or 2 )
Example:
Extension 808 is at non-direct access mode, he wants to make external
call via CO line 1.
Lifts extension 808
Operating:

2.5.4 Direct / Non-Direct Access CO Line Assignment

Format 1:
* 8 ABC N #
ABC = Extension number
N = 0 = Non-direct access CO line mode
N = 1 = Access CO line directly
Format 2:
* 8 000 # ( Disable access CO line directly for all extensions )
Description:
When N = 0
user can input extension number directly to make internal call, but
he must dial 0 or tap hookswitch to get external dial tone before input
phone number when he needs to make external call.
* 3 12 #
can enable CO line 1,2.
,
Press 0(or tap hookswitch)
.
2.5.4
Input number will enter free CO line.
( At non-direct access CO line mode)
At direct access CO line mode)
Input #1
, extension will be at intercom state as soon as off-hook,
- 4 -
Input number.
Input phone number.

Advertisement

Table of Contents
loading

Table of Contents