Bosch GKE Professional 40 BCE Original Instructions Manual page 22

OBJ_BUCH-716-004.book Page 22 Tuesday, August 23, 2011 3:50 PM
22 | English
ways be ready to hand. Persons unfit or tired must not
operate the chain saw.
Always ensure all handles and guards are fitted when
using the machine. Never attempt to use an incomplete
machine or one fitted with an unauthorized modification.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
It is recommended that the first time user should have practi-
cal instruction in the use of the chainsaw and the protective
equipment from an experienced operator. The initial practice
should be cutting logs on a saw horse or cradle.
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the symbols and their meanings.
The correct interpretation of the symbols helps you operate the power tool better and more secure.
Symbol Meaning
Read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Remove the plug from the socket or mains immediately before carrying out any adjustments, serv-
icing or maintenance or if the cable is damaged or cut.
Do not use the machine in the rain or leave it outdoors when it is raining.
Wear safety goggles.
Wear ear protectors. Exposure to noise can cause hearing loss.
The kickback brake and the run-down brake stop the chain saw within short time.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power tools that are no longer usable must be collected
separately and disposed of in an environmentally correct manner.
1 609 929 V11 | (23.8.11)
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Bosch Power Tools