Table of Contents
Advertisement
UTT Technologies
Step 3
Select One2One from the NAT Type drop-down list.
Step 4
Enter 202.1.1.131 in the Start External IP text box; enter 192.168.1.200 and
192.168.1.203 in the Start Internal IP and End Internal IP text boxes
respectively.
Step 5
Select WAN1 from the Bind to drop-down list.
Step 6
Click the Save button to save the settings. Till now you have finished
configuring the NAT rule, and you can view it in the NAT Rule List.
6.1.4 DMZ
Enable DMZ: It allows you to enable or disable DMZ feature. If you want to enable
DMZ feature on the Gigabit Router, please select this check box.
DMZ Host IP Address: It specifies the private IP address of the DMZ host.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
http://www.uttglobal.com
Figure 6-8 One2One NAT Rule Settings - Example
Figure 6-9 DMZ Host Settings
Chapter 7 Advanced
Page 77
Hide quick links:
Advertisement
Table of Contents
