How To Connect The Gigabit Router To The Internet Using Static Ip; How To Connect The Gigabit Router To The Internet Using Dhcp - UTT HiPER 840G Advanced Configuration Manual

UTT Technologies
Figure B-0-2 Viewing PPPoE Connection Status in the Internet Connection List (Continue)
Step 8 Configure the local computers according to the steps described in Appendix A
How to Configure Your PC.
2. How to connect the Gigabit Router to the Internet
using Static IP?
Step 1 Please make sure the Internet connection is normal. You may use your PC to
test.
Step 2 Connect a network cable from the network device provided by your ISP to a
WAN port of the Gigabit Router.
Step 3 Configure the Static IP Internet connection related parameters in the Start >
Setup Wizard or the Network > WAN page.
After the Static IP connection is established successfully, you can view its
Step 4
configuration and status information in the Internet Connection List on the
Network > WAN page.
Step 5 Configure the local computers according to the steps described in Appendix A
How to Configure Your PC.
3. How to connect the Gigabit Router to the Internet
using DHCP?
Step 1 Please make sure the Internet connection is normal. You may use your PC to
test.
Step 2 Connect a network cable from the network device provided by your ISP to a
WAN port of the Gigabit Router.
http://www.uttglobal.com
Appendix B FAQ
Page
15615615