UTT Technologies
primary connections, and others are used as backup connections. The working principle is
as follows:
1.
As long as one or more primary connections are normal, the LAN users will use the
primary connection(s) to access the Internet.
2.
If all the primary connections are faulty, it will automatically switch to the backup
connection(s) to let the LAN users use them to access the Internet.
3.
Once one or more faulty primary connections are back to normal, it will automatically
switch back to the primary connection.
Note
During connections switching, some user applications (such as some online games)
may be interrupted unexpectedly due to the nature of TCP connection.
5.2.2 Load Balancing Global Settings
The following sections describe the global settings related to Full Load Balancing and
Partial Load Balancing respectively. For more information, please refer to Section
5.2.1.2 Load Balancing Mode.
5.2.2.1 Global Settings - Full Load Balancing
Mode: It specifies the mode of load balancing. Here please leave the default value of
Full Load Balancing.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
http://www.uttglobal.com
Figure 5-11 Global Settings - Full Load Balancing
Chapter 5 Network
Page
4343