Ddns Verification - UTT HiPER 840G Advanced Configuration Manual

UTT Technologies
Update: Click to update DDNS status.

5.5.5 DDNS Verification

To verify whether DDNS is updated successfully, you can use the ping command at the
command prompt on the PC, for example: ping avery12345.3322.org
If the displayed page is similar to the screenshot below: the domain name is resolved to
an IP address successfully (58.246.187.126 in this example), DDNS is updated
successfully.
Note
1. Only when the WAN interface IP address is a public IP address, the Internet users
can use its mapped domain name to access the Gigabit Router normally.
2. DDNS feature can help you implement VPN tunnels using dynamic IP addresses on
the Gigabit Router.
http://www.uttglobal.com
Figure 5-29 DDNS Status
Chapter 5 Network
Page
6262