UTT HiPER 840G Advanced Configuration Manual page 44

UTT Technologies
Interface: It specifies the name of the WAN interface. Here please select WAN1 or
APClient.
Connection Type: It specifies the type of the Internet connection. Here please select
DHCP. The Gigabit Router will automatically obtain the WAN IP address, subnet
mask and gateway and DNS server addresses from your ISP's DHCP server.
ISP Policy and Update Policy: Refer to Section 5.1.2.1.1 Static IP Internet
Connection Settings for detailed information.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
5.1.2.1.3 PPPoE Internet Connection Settings
Interface: It specifies the name of the WAN interface. Here please select WAN1 or
APClient.
Connection Type: It specifies the type of the Internet connection. Here please select
PPPoE. The Gigabit Router will automatically obtain the WAN IP address, subnet
mask and gateway IP address from your ISP's PPPoE server.
ISP Policy and Update Policy: Refer to Section 5.1.2.1.1 Static IP Internet
Connection Settings for detailed information.
User Name and Password: They specify the PPPoE login user name and password
provided by your ISP. Please ask your ISP if you have any questions.
PPP Authentication: It specifies the PPP authentication mode of the PPPoE
http://www.uttglobal.com
Figure 5-8 PPPoE Internet Connection Settings
Chapter 5 Network
Page
3737