Ipsec Vpn; Introduction To Ipsec Implementation - UTT HiPER 840G Advanced Configuration Manual

UTT Technologies
To configure the HiPER 840G as a PPTP client, follow these steps:
Step 1 Go to the VPN > PPTP Client page, and click the Add button to go to the PPTP
Client Settings page.
Step 2 Make the following settings.
Enable
Tunnel Name
User Name
Password
PPP Authentication
Remote Subnet IP
Remote Subnet Mask
Tunnel Server IP/Domain Name
Step 3 Click the Save button.
9.5
With the development of network safety standards and protocols, various VPN
technologies have emerged. IPSec VPN is one of the most widely used VPN security
technologies today.
IPSec is a set of open standards and protocols to implement network secure
communication, which provides two security mechanisms: encryption and authentication.
Encryption mechanism is used to ensure data confidentiality; and authentication
mechanism is used to ensure that data is from the claimed sender and not destroyed or
tampered during transmission.

9.5.1 Introduction to IPSec Implementation

As shown inTable 11-1 Four Types of IPSec VPN Configuration, the UTT VPN gateway
supports four types of IPSec VPN configuration.
ID Key Mode
http://www.uttglobal.com

IPSec VPN

Connection Type
Select
To_HQ
VPN_test
vpntest
Either
192.168.123.1
255.255.255.0
200.200.202.123
P1 Exchange Mode
Chapter 10 VPN
Page
13313313