Pptp Client List - UTT HiPER 840G Advanced Configuration Manual

UTT Technologies
None: It means that no authentication is performed.
•
Either: It means that the Gigabit Router will automatically negotiate it with the
•
remote VPN appliance.
Remote Subnet IP: It specifies the subnet IP address of the remote network. In most
cases, you may enter the IP address of the remote VPN appliance's LAN interface.
Remote Subnet Mask: It specifies the subnet mask of the remote network.
Tunnel Server IP/Domain Name: It specifies the IP address or domain name of the
remote PPTP/L2TP server. In most cases, you may enter the WAN IP address or
domain name of the remote VPN appliance.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
Back: Click to go back to the PPTP Client List.
9.3

PPTP Client List

After you have configured a PPTP/L2TP client entry, you can view its configuration and
status in the PPTP Client List, see Figure 9-6.
After the Gigabit Router has successfully established a PPTP tunnel with the remote
http://www.uttglobal.com
Figure 9-6 PPTP Client List
Figure 9-7 PPTP Client List (Continue)
Chapter 10 VPN
Page
13113113