Table of Contents
Advertisement
UTT Technologies
9.1.6 PPTP Sessions Limit
The Gigabit Router supports two concurrent PPTP sessions (i.e., tunnels) at most. If there
are already two active PPTP sessions on the Gigabit Router, the system will reject any
request for creating a new PPTP session and prompt you.
9.2
PPTP Client Settings
Enable: It allows you to enable or disable the PPTP client entry. The default value is
checked, which means the PPTP client entry is in effect. If you want to disable the
entry temporarily instead of deleting it, please clear the check box.
Tunnel Name: It specifies a unique name of the PPTP tunnel. It is used to identify
multiple tunnels.
User Name: It specifies a unique user name of the PPTP/L2TP client. It must be
between 1 and 31 characters long. The remote PPTP/L2TP server will use the User
Name and Password to identify the client.
Password: It specifies a password of the PPTP/L2TP client.
PPP Authentication: It specifies the PPP authentication mode by which the remote
PPTP server authenticates the PPTP client. The available options are None, PAP,
CHAP and Either.
PAP: Password Authentication Protocol.
•
CHAP: Challenge Handshake Authentication Protocol.
•
http://www.uttglobal.com
Figure 9-5 PPTP Client Settings
Chapter 10 VPN
Page
13013013
Hide quick links:
Advertisement
Table of Contents
