UTT HiPER 840G Advanced Configuration Manual page 35

UTT Technologies
Line: Select this option to display a line chart. The chart includes two lines with
●
different colors, which represent the real-time Rx rate and Tx rate resectively.
Solid: Select this option to display an area chart. The area chart is like the line
●
chart except that the area between the axis the plot line is solid.
Color: It specifies the colors of the two lines (or filled areas), such as red, blue, black,
etc.
Reverse: Click to toggle the colors of the two lines (or filled areas).
LAN, WAN1, APClient and 3G: You can select an interface name at the top to view
the traffic chart for that interface.
View Traffic Statistics: Click to view the ingress and egress traffic statistics for the
interfaces that have been configured, see Figure 4-4.
WAN1, 3G, APClient and LAN: You can view the traffic statistics for each interface,
including the number of bytes received and transmitted, and the number of packets
received and transmitted.
Clear: Click to clear all traffic statistics.
Refresh: Click to view the latest traffic statistics.
Back: Click to go back to the Start > Interface Traffic page.
Note
http://www.uttglobal.com
Figure 4-4 Traffic Statistics
/
www.argo-contar.com
Chapter 4 Start Menu
Page 28