UTT Technologies
5.6
UPnP
This section describes the Network > UPnP page.
The Universal Plug and Play (UPnP) is architecture that implements zero configuration
networking, that is, it provides automatic IP configuration and dynamic discovery of the
UPnP compatible devices from various vendors. A UPnP compatible device can
dynamically join a network and work properly.
When you enable UPnP, the Gigabit Router allows any local UPnP-enabled device to
perform a variety of actions, including retrieving the public IP address, enumerating
existing port mappings, and adding or removing port mappings. By adding a port mapping,
a UPnP-enabled device opens the related service ports on the Gigabit Router to allow
outside computers to access.
5.6.1 Enable UPnP
Enable UPnP: It allows you to enable or disable UPnP. If you want to enable UPnP,
please select this check box.
Save: Click to save your changes.
5.6.2 UPnP Port Forwarding List
The UPnP Port Forwarding List lists all the port forwarding entries established using
UPnP, see the following figure.
http://www.uttglobal.com
Figure 5-30 Enable UPnP
Chapter 5 Network
Page
6363