Selecting A Channel; D Selecting A Channel; D Voting Operation; D Priority A Channel Selection - Icom IC-F3200DEX Operating Instructions Manual

3
BASIC OPERATION

Selecting a channel

D Selecting a channel
To select the desired operating channel:
Rotate [ROTARY SELECTOR].
➥
Push one of the memory channel keys, [MR-CH 1]
➥
to [MR-CH 4].
Push [Prio A], [Prio B], [Prio A (Rewrite)] or [Prio B
➥
(Rewrite)].
AUTOMATIC SCAN TYPE:
Selecting a channel is not necessary. When turning ON
the power, the transceiver automatically starts scan-
ning. Scanning stops when a signal is detected.
D Voting Operation
The transceiver automatically starts scanning when a
zone, specified for the voting operation, is selected.
The voting scan detects the signal of the repeater and
automatically selects the strongest station.
D Priority A channel selection
When one of the following operations is performed, the
transceiver automatically selects the Priority A chan-
nel.
• Turning ON the power
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Auto reset
The Priority A channel is selected when the Auto Reset
timer ends.
3-3