Table 20: Audio/Video Status Diagnostic Field Descriptions; Figure 39: Audio/Video Status Diagnostic Screen - Motorola DCX3520E-M Installation Manual

Diagnostics

Table 20: Audio/Video Status Diagnostic Field Descriptions

Field Description
S/PDIF Output Indicates S/PDIF Mode as set by application software.
OSD Display
N/A
IEC958PCM
Dolby Digital
1/0
2/0
3/0
2/1
3/1
2/2
3/2
LFE: Low The LFE indicates if the nomenclature low frequency effects are available in the Dolby
Frequency Effect Digital audio stream, as indicated if the "0.1" is present in the Dolby Digital 5.1
nomenclature (for example, "Dolby Digital 5.1 surround"). Valid values include:
OSD Display
0
1
High-Definition DVR DCX3510-M
365-095-17066-x.1

Figure 39: Audio/Video Status Diagnostic Screen

Description
Audio S/PDIF mode is not applicable.
PCM audio selected.
Dolby Digital uses the following speaker selections:
Right front or left front
Right front and left front
Right front and left front and center
Right front and left front and (right rear or left rear)
Right front and left front and center and (right rear or left rear)
Right front and left front and right rear and left rear
Right front and left front and center and right rear and left rear
Description
LFE is not available
LFE is available (i.e. "Dolby Digital 5.1 surround").
Installation Manual 75