Side Brush Cleaning; Side Brush Replacement; Driving Wheel Cleaning; Dust Sensor Cleaning - ECOVACS ECO D77 Instruction Manual

Side brush cleaning

Side brush replacement

Please replace the side brush when it is desroyed.
Take the side brush and pull it
out.

Driving wheel cleaning

Dust sensor cleaning

Side brush is a kind of easy wear part. We suggest you to check it
every time it takes cleaning task. Please change it if necessary.
Note
The host will alarm when the side brush tangles and it will show
on LCD as .
Clean any dirt or dust on the
side brush and the side brush
slot with a clean cloth. Should
the Side Brush appear to be da-
maged so that it is not cleaning
properly, replace with the same
color Side Brush.
Use multifunctional cleaning tool to remove the dust or hair on
driving wheel.
Note
If the wheel is tangled by hair or cloth, the host will alarm and it
will show on LCD as
The dust sensor is located at the front of dust entrance. It is able
to detect the concentration of dust so that it can choose efficient
mode to work. We suggest you to clean dust sensor once you
clean dust box to improve work efficiency.
1. Turn the unit's power off.
2. Remove the dust box and clean the sensors with soft dry cloth.
3. Clean the dust sensors each time the dust box is removed.
4. Frequent cleaning is recommended to ensure optimum
performance of your Deebot.
After cleaning, repla-
ce the Side Brush by
matching the brush hub
color to the slot color
and then press down in
the center of the Brush
until you hear a „click"
noise. Give a slight tug
on the brush to make
sure it is securely as-
sembled
.
ENG
Live Smart. Enjoy Life.
ENG - 141