Remote Setup (Mfc-9120Cn And Mfc-9320Cw Only); Remote Setup - Brother DCP-9010CN User Manual

Remote Setup (MFC-9120CN and
4
MFC-9320CW only)

Remote Setup

The Remote Setup program lets you configure many machine settings from a Windows
you start this application, the settings on your machine will be downloaded automatically to your PC and
displayed on your PC screen. If you change the settings, you can upload them directly to the machine.
Click the Start button, All Programs, Brother, MFC-XXXX (or MFC-XXXX LAN) and Remote Setup.
Note
• If your machine is connected via a Network, you have to enter your password.
• The default password is "access". You can use BRAdmin Light or Web Based Management to change this
password. (See the Network Users Guide for details.)
OK

Lets you start uploading data to the machine and exit the Remote Setup application. If an error message
is displayed, enter the correct data again and then click OK.
 Cancel
Lets you exit the Remote Setup application without uploading data to the machine.
Apply

Lets you upload data to the machine without exiting the Remote Setup application.
 Print
Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine and then click Print.
4
4
®
application. When
83
4