Brother DCP-9010CN User Manual page 154

Printing and Faxing
 Toner Save
You can conserve toner using this feature. When you check Toner Save, your prints appear lighter. The
default setting is Off.
Note
We do not recommend Toner Save for printing photo or greyscale images.
 Color/Mono
You can change the Color/Mono settings as follows:
• Auto
The printer checks the content of your documents for colour. If colour is detected, it prints in colour. If
no colour content is detected, it prints in monochrome. The total printing speed may become slower.
• Color
When your document contains colour and you want to print it in colour, select this mode.
• Mono
Select this mode if your document has only black and greyscale text and/or objects. Mono mode makes
the print processing speed faster than colour mode. If your document contains colour, selecting Mono
mode prints your document in 256 levels of grey.
 Color Mode
You can change the colour mode as follows:
• Normal
This is the Default colour mode.
• Vivid
The colour of all elements are adjusted to become a more vivid colour.
• None
If you want to apply the setting of the application, choose this setting. The printer driver does not adjust
the colour.
 Improve Gray Color
You can improve the image quality of shaded areas by ticking the Improve Gray Color pop-up menu.
Note
If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep
printing as long as the Black toner does not reach the end of its life.
7
146